SM
SchoolM
Toggle navigation
Deutsch
English
français
polski
русский
shqip
Max Mustermann
Logout
technical parameter | Catalog-ID 000730
Bm
1
parent metal 1
Bm
2
parent metal 2
α
β
°
b
0.0 mm
c
0.0 mm
t
1
0.0 mm
t
2
0.0 mm
D
1
D
2
R
h
1
mm
h
2
mm
b
1
0.0 mm
b
2
0.0 mm
a
1
a
2
s
1
s
2
parent metal / welding consumables / Shielding gases
parent metal 1 (Bm
1
)
Material group
Steels with a specified minimum yield strength ReH <= 275 N/mm2
Steels with a specified minimum yield strength 275 N/mm2 < ReH <= 360
Normalized fine-grain steels with a specified minimum yield strength ReH > 360 N/mm2
Steels with improved atmospheric corrosion resistance whose analysis may exceed the requirements for the individual elements as indicated in group 1
Thermomechanically treated fine-grain steels and cast steels with a specified minimum yield strength ReH > 360 N/mm2
Thermomechanically treated fine-grain steels and cast steels with a specified minimum yield strength 360 N/mm2 < ReH <= 460 N/mm2
Thermomechanically treated fine-grain steels and cast steels with a specified minimum yield strength ReH > 460 N/mm2
Quenched and tempered and precipitation-hardened fine-grain steels except stainless steels with a specified minimum yield strength ReH > 360 N/mm2
Quenched and tempered fine-grain steels with a specified minimum yield strength 360 N/mm2 < ReH <= 690 N/mm2
Quenched and tempered fine-grain steels with a specified minimum yield strength ReH > 690 N/mm2
Precipitation-hardened fine-grain steels except stainless steels
Low vanadium alloyed Cr-Mo-(Ni) steels with Mo <= 0,7 % and V <= 0,1 %
Steels with Cr <= 0,3 % and Ni <= 0,7 %
Steels with Cr <= 0,7 % and Ni <= 1,5 %
Cr-Mo steels free of vanadium with C <= 0,35 %
Steels with 0,75 % <= Cr <= 1,5 % and Mo <= 0,7 %
Steels with 1,5 % < Cr <= 3,5 % and 0,7 % < Mo <= 1,2 %
Steels with 3,5 % < Cr <= 7,0 % and 0,4 % < Mo <= 0,7 %
Steels with 7,0 % < Cr <= 10,0 % and 0,7 % < Mo <= 1,2 %
High vanadium alloyed Cr-Mo-(Ni) steels
Steels with 0,3 % <= Cr <= 0,75 %, Mo <= 0,7 % and V <= 0,35 %
Steels with 0,75 % < Cr <= 3,5 %, 0,7 % < Mo <= 1,2 % and V <= 0,35 %
Steels with 3,5 % < Cr <= 7,0 %, Mo <= 0,7 % and 0,45 % <= V <= 0,55 %
Steels with 7,0 % < Cr <= 12,5 %, 0,7 % < Mo <= 1,2 % and V <= 0,35 %
Ferritic, martensitic or precipitation-hardened stainless steels with C <= 0,35 % and 10,5 % <= Cr <= 30 %
Ferritic stainless steels
Martensitic stainless steels
Precipitation-hardened stainless steels
Austenitic stainless steels, Ni <= 31 %
Austenitic stainless steels with Cr <= 19 %
Austenitic stainless steels with Cr > 19 %
Manganese austenitic stainless steels with 4 % < Mn <= 12 %
Nickel alloy steels with Ni <= 10,0 %
Nickel alloy steels with Ni <= 3,0 %
Nickel alloy steels with 3,0 % < Ni = 8,0 %
Nickel alloy steels with 8,0 % < Ni <= 10,0 %
Austenitic ferritic stainless steels (duplex)
Austenitic ferritic stainless steels with Cr <= 24 %
Austenitic ferritic stainless steels with Cr > 24 %
Steels covered by group 1 except 0,25 % < C <= 0,85 %
Steels as indicated in group 11 with 0,25 % < C <= 0,35 %
Steels as indicated in group 11 with 0,35 % < C <= 0,5 %
Steels as indicated in group 11 with 0,5 % < C <= 0,85 %
Pure aluminium with <= 1 % impurities or alloy content
Non-heat-treatable alloys
Aluminium-manganese alloys
Aluminium-magnesium alloys with Mg <= 1,5 %
Aluminium-magnesium alloys with 1,5 % < Mg <= 3,5 %
Aluminium-magnesium alloys with Mg > 3,5 %
Heat-treatable alloys
Aluminium-magnesium-silicon alloys
Aluminium-zinc-magnesium alloys
Aluminium-silicon alloys with Cu <= 1 %
Aluminium-silicon alloys with Cu <= 1 % and 5 % < Si <= 15 %
Aluminium-silicon-magnesium alloys with Cu <= 1 % 5 % < Si <= 15 % and 0,1 % < Mg <= 0,80 %
Aluminium-silicon-copper alloys with 5 % < Si <= 14 % 1 % < Cu <= 5 % and Mg <= 0,8 %
Aluminium-copper alloys with 2 % < Cu <= 6 %
Copper with up to 6 % Ag and 3 % Fe
Copper-zinc alloys
Copper-zinc alloys, binary
Copper-zinc alloys, complex
Copper-tin alloys
Copper-nickel alloys
Copper-aluminium alloys
Copper-nickel-zinc alloys
Copper alloys, low-alloyed (less than 5 % other elements) not covered by groups 31 to 36
Other copper alloys (5 % or more other elements) not covered by groups 31 to 36
Pure nickel
Nickel-copper alloys (Ni-Cu) with Ni => 45 %, Cu => 10 %
Nickel-chromium alloys(Ni-Cr-Fe-Mo) with Ni => 40 %
Nickel-molybdenum alloys (Ni-Mo) with Ni <= 45 %, Mo => 32 %
Nickel-iron-chromium alloys (Ni-Fe-Cr) with Ni => 31 %
Nickel-chromium-cobalt alloys (Ni-Cr-Co) with Ni => 45 %, Co => 10 %
Nickel-iron-chromium-copper alloys (Ni-Fe-Cr-Cu) with Ni => 45 %
Nickel-iron-cobalt alloys (Ni-Fe-Co-Cr-Mo-Cu) with 31 % <= Ni <= 45 % and Fe => 20 %
Pure titanium
Titanium with O2 < 0,20 %
Titanium with 0,20 % < O2 <= 0,25 %
Titanium with 0,25 % < O2 <= 0,35 %
Titanium with 0,35 % < O2 <= 0,40 %
Alpha alloys (Alloys covered by group 52 are: Ti-0,2Pd Ti-2,5Cu Ti-5Al-2,5Sn Ti-8Al-1Mo-1V Ti-6Al-2Sn-4Zr-2Mo Ti-6Al-2Nb-1Ta-0,8Mo)
Alpha-beta alloys (Alloys covered by group 53 are: Ti-3Al-2,5V Ti-6Al-4V Ti-6Al-6V-2Sn Ti-7Al-4Mo)
Near-beta and beta alloys (Alloys covered by group 54 are: Ti-10V-2Fe-3Al Ti-13V-11Cr-3Al Ti-11,5Mo-6Zr-4,5Sn Ti-3Al-8V-6Cr-4Zr-4Mo)
Pure zirconium
Zirconium with 2,5 % Nb
Grey cast irons with specified tensile strength or Brinell hardness
Spheroidal-graphite cast irons with specified mechanical properties
Spheroidal-graphite cast irons, ferrite type, with specified tensile strength, 0,2 % proof stress, elongation and specified impact resistance values
Spheroidal-graphite cast irons, ferrite type, with specified tensile strength, 0,2 % proof stress and elongation or specified Brinell hardness
Spheroidal-graphite cast irons EN-GJS-500-7 and EN-GJS-450-10 (if > 20 % perlite) or specified Brinell hardness
Spheroidal-graphite cast irons, perlite type, with specified tensile strength, 0,2 % proof stress and elongation or specified Brinell hardness
Malleable cast irons
Austempered ductile cast irons
Austenitic cast irons
Cast irons excepting groups 71 to 75
Copper
Nickel
Titan
EN 10025-2 - S235JR
EN 10025-2 - S275J2
EN 10210-1 - S275NH
EN 10216-1 - P235TR2
Basic material catalog
EN 10022-2 - 17Mo3 ( 1.5415 )
EN 10022-2 - 14Mo6 ( 1.5423 )
EN 10025-2 - S185 ( 1.0035 )
EN 10025-2 - S235JR ( 1.0038 )
EN 10025-2 - S275JR ( 1.0044 )
EN 10025-2 - S235J0 ( 1.0114 )
EN 10025-2 - S235J2+N ( 1.0116 )
EN 10025-2 - S275J0 ( 1.0143 )
EN 10025-2 - S275J2 ( 1.0145 )
EN 10025-3 - S275N ( 1.0490 )
EN 10025-3 - S275NL ( 1.0491 )
EN 10025-4 - S275M ( 1.8818 )
EN 10025-4 - S275ML ( 1.8819 )
EN 10028-2 - S235J2 ( 1.0117 )
EN 10028-2 - P235GH ( 1.0345 )
EN 10028-2 - P265GH ( 1.0425 )
EN 10028-3 - P275N ( 1.0486 )
EN 10028-3 - P275NH ( 1.0487 )
EN 10028-3 - P275NL1 ( 1.0488 )
EN 10028-3 - P275NL2 ( 1.1104 )
EN 10149-3 - P265NB ( 1.0423 )
EN 10149-3 - S260NC ( 1.0971 )
EN 10248-1 - S240GP ( 1.0021 )
EN 10248-1 - S270GP ( 1.0023 )
Filler metal 1
Material group
S
Norm name ISO
1.1 | FM1 | S | CastoMag 45255 | ISO 14341-A-G3Si1 | Castolin Europe GmbH
1.1 | FM1 | S | CastoMag 45250 | ISO 14341-A-G4Si1 | Castolin Europe GmbH
1.1 | FM1 | S | CastoMag 45203 | ISO 14341-A-G 46 4 M21 4Si1 | Castolin Europe GmbH
1.1 | FM1 | S | CASTOMAG 45202 | ISO 14341-A-G 42 4 M21 3Si1 | Castolin Europe GmbH
1.1 | FM2 | S | CastoMag 45254 | ISO 16834 A-Mn 3 Ni1Cu | Castolin Europe GmbH
1.1 | FM1 | S | DT-SG 3 | ISO 14341-A-G4Si1 | Dratec Draht-Technik GmbH
1.1 | FM1 | S | ETA 2 | ISO 14341-A-G 3Si1 | ISAF Group
1.1 | FM1 | S | Carbo2000 | ISO 14341-A-G 46 2 C/M G4Si1 | ISAF Group
1.1 | FM1 | S | Normag2 | ISO 14341-A-G 42 4 M G3Si1 | ISAF Group
1.1 | FM1 | S | ETA 3 | ISO 14341-A-G 46 4 M G4Si1 | ISAF Group
1.1 | FM1 | S | Automag 3 | ISO 14341-A-G 46 4 M G4Si1 | ISAF Group
1.1 | FM1 | S | Carbofil 1 | ISO 14341-A-G3Si1 | OERLIKON
1.1 | FM5 | S | FF-IG | ISO 14343-A G 22 12 H | voestalpine Böhler
1.1 | FM1 | S | Union K 52 | ISO 14341-A-G 3Si1 | voestalpine Böhler
1.1 | FM1 | S | Union SG 2-H | ISO 14341-A-G 3Si1 | voestalpine Böhler
1.2 | FM2 | S | CastoMag 45250 | ISO 14341-A-G 46 2 M G4Si1 | Castolin Europe GmbH
1.2 | FM1 | S | CastoMag 45273 | ISO 21952-A-G MoSi | Castolin Europe GmbH
1.2 | FM1 | S | CastoMag 45202 | ISO 14341-A: G 42 4 M G3Si1 | Castolin Europe GmbH
1.2 | FM1 | S | DT-SG 2 | ISO 14341-A-G3Si1 | Dratec Draht-Technik GmbH
1.2 | FM1 | S | WELD G3Si1 | ISO 14341-A-G3Si1 | ESAB AB
1.2 | FM1 | S | OK Autrod 12.64 | ISO 14341-A-G4Si1 | ESAB AB
1.2 | FM1 | S | OK AristoRod 12.57 | ISO 14341-A-G2Si | ESAB AB
1.2 | FM1 | S | OK Autrod 12.51 | ISO 14341-A-G3Si1 | ESAB AB
1.2 | FM1 | S | OK Autrod 12.56 | ISO 14341-A-G3Si1 | ESAB AB
1.2 | FM1 | S | SW 70S G3 | ISO 14341-A-G3Si1 | EWM AG
1.2 | FM1 | S | SW 80S Mo | ISO 21952-A-G MoSi | EWM AG
1.2 | FM1 | S | SW 70S G3 XQ | ISO 14341-A-G3Si1 | EWM AG
1.2 | FM1 | S | Automag 3 | ISO 14341-A-G 46 4 M G4Si1 | ISAF Group
1.2 | FM1 | S | Automag 3 | ISO 14341-A-G 46 4 M G4Si1 | ISAF Group
1.2 | FM1 | S | CARBOFIL 1 | ISO 14341-A-G 42 4 M21 3Si1 | Lincoln Electric Europe B.V.
1.2 | FM1 | S | Union K 56 | ISO 14343-A-G 4Si1 | voestalpine Böhler
1.3 | FM2 | S | Carbo S-NiMo1 | EN ISO 16834: GmN3Ni1Mo | Carbo Weld
1.3 | FM1 | S | OK AristoRod 13.26L | ISO 14341-A-G Z 3Ni1 Cu | ESAB AB
Norm name AWS
Trade name
Certificate of Approval
Protective gas group
ISO 14174 - S
ISO 14175 - C1
ISO 14175 - I1
ISO 14175 - I2
ISO 14175 - I3
ISO 14175 - M11
ISO 14175 - M12
ISO 14175 - M13
ISO 14175 - M14
ISO 14175 - M20
ISO 14175 - M21
ISO 14175 - M22
ISO 14175 - M23
ISO 14175 - M24
ISO 14175 - M25
ISO 14175 - M31
ISO 14175 - M32
ISO 14175 - N2
ISO 14175 - N4
ISO 14175 - N5
ISO 14175 - R1
ISO 14175 - R2
ISO 14175 - Z
l/min
Norm name ISO
Manufacturer's name
backing gas
ISO 14174 - S
ISO 14175 - C1
ISO 14175 - I1
ISO 14175 - I2
ISO 14175 - I3
ISO 14175 - M11
ISO 14175 - M12
ISO 14175 - M13
ISO 14175 - M14
ISO 14175 - M20
ISO 14175 - M21
ISO 14175 - M22
ISO 14175 - M23
ISO 14175 - M24
ISO 14175 - M25
ISO 14175 - M31
ISO 14175 - M32
ISO 14175 - N2
ISO 14175 - N4
ISO 14175 - N5
ISO 14175 - R1
ISO 14175 - R2
ISO 14175 - Z
l/min
Norm name ISO
Manufacturer's name
parent metal 2 (Bm
2
)
Material group
Steels with a specified minimum yield strength ReH <= 275 N/mm2
Steels with a specified minimum yield strength 275 N/mm2 < ReH <= 360
Normalized fine-grain steels with a specified minimum yield strength ReH > 360 N/mm2
Steels with improved atmospheric corrosion resistance whose analysis may exceed the requirements for the individual elements as indicated in group 1
Thermomechanically treated fine-grain steels and cast steels with a specified minimum yield strength ReH > 360 N/mm2
Thermomechanically treated fine-grain steels and cast steels with a specified minimum yield strength 360 N/mm2 < ReH <= 460 N/mm2
Thermomechanically treated fine-grain steels and cast steels with a specified minimum yield strength ReH > 460 N/mm2
Quenched and tempered and precipitation-hardened fine-grain steels except stainless steels with a specified minimum yield strength ReH > 360 N/mm2
Quenched and tempered fine-grain steels with a specified minimum yield strength 360 N/mm2 < ReH <= 690 N/mm2
Quenched and tempered fine-grain steels with a specified minimum yield strength ReH > 690 N/mm2
Precipitation-hardened fine-grain steels except stainless steels
Low vanadium alloyed Cr-Mo-(Ni) steels with Mo <= 0,7 % and V <= 0,1 %
Steels with Cr <= 0,3 % and Ni <= 0,7 %
Steels with Cr <= 0,7 % and Ni <= 1,5 %
Cr-Mo steels free of vanadium with C <= 0,35 %
Steels with 0,75 % <= Cr <= 1,5 % and Mo <= 0,7 %
Steels with 1,5 % < Cr <= 3,5 % and 0,7 % < Mo <= 1,2 %
Steels with 3,5 % < Cr <= 7,0 % and 0,4 % < Mo <= 0,7 %
Steels with 7,0 % < Cr <= 10,0 % and 0,7 % < Mo <= 1,2 %
High vanadium alloyed Cr-Mo-(Ni) steels
Steels with 0,3 % <= Cr <= 0,75 %, Mo <= 0,7 % and V <= 0,35 %
Steels with 0,75 % < Cr <= 3,5 %, 0,7 % < Mo <= 1,2 % and V <= 0,35 %
Steels with 3,5 % < Cr <= 7,0 %, Mo <= 0,7 % and 0,45 % <= V <= 0,55 %
Steels with 7,0 % < Cr <= 12,5 %, 0,7 % < Mo <= 1,2 % and V <= 0,35 %
Ferritic, martensitic or precipitation-hardened stainless steels with C <= 0,35 % and 10,5 % <= Cr <= 30 %
Ferritic stainless steels
Martensitic stainless steels
Precipitation-hardened stainless steels
Austenitic stainless steels, Ni <= 31 %
Austenitic stainless steels with Cr <= 19 %
Austenitic stainless steels with Cr > 19 %
Manganese austenitic stainless steels with 4 % < Mn <= 12 %
Nickel alloy steels with Ni <= 10,0 %
Nickel alloy steels with Ni <= 3,0 %
Nickel alloy steels with 3,0 % < Ni = 8,0 %
Nickel alloy steels with 8,0 % < Ni <= 10,0 %
Austenitic ferritic stainless steels (duplex)
Austenitic ferritic stainless steels with Cr <= 24 %
Austenitic ferritic stainless steels with Cr > 24 %
Steels covered by group 1 except 0,25 % < C <= 0,85 %
Steels as indicated in group 11 with 0,25 % < C <= 0,35 %
Steels as indicated in group 11 with 0,35 % < C <= 0,5 %
Steels as indicated in group 11 with 0,5 % < C <= 0,85 %
Pure aluminium with <= 1 % impurities or alloy content
Non-heat-treatable alloys
Aluminium-manganese alloys
Aluminium-magnesium alloys with Mg <= 1,5 %
Aluminium-magnesium alloys with 1,5 % < Mg <= 3,5 %
Aluminium-magnesium alloys with Mg > 3,5 %
Heat-treatable alloys
Aluminium-magnesium-silicon alloys
Aluminium-zinc-magnesium alloys
Aluminium-silicon alloys with Cu <= 1 %
Aluminium-silicon alloys with Cu <= 1 % and 5 % < Si <= 15 %
Aluminium-silicon-magnesium alloys with Cu <= 1 % 5 % < Si <= 15 % and 0,1 % < Mg <= 0,80 %
Aluminium-silicon-copper alloys with 5 % < Si <= 14 % 1 % < Cu <= 5 % and Mg <= 0,8 %
Aluminium-copper alloys with 2 % < Cu <= 6 %
Copper with up to 6 % Ag and 3 % Fe
Copper-zinc alloys
Copper-zinc alloys, binary
Copper-zinc alloys, complex
Copper-tin alloys
Copper-nickel alloys
Copper-aluminium alloys
Copper-nickel-zinc alloys
Copper alloys, low-alloyed (less than 5 % other elements) not covered by groups 31 to 36
Other copper alloys (5 % or more other elements) not covered by groups 31 to 36
Pure nickel
Nickel-copper alloys (Ni-Cu) with Ni => 45 %, Cu => 10 %
Nickel-chromium alloys(Ni-Cr-Fe-Mo) with Ni => 40 %
Nickel-molybdenum alloys (Ni-Mo) with Ni <= 45 %, Mo => 32 %
Nickel-iron-chromium alloys (Ni-Fe-Cr) with Ni => 31 %
Nickel-chromium-cobalt alloys (Ni-Cr-Co) with Ni => 45 %, Co => 10 %
Nickel-iron-chromium-copper alloys (Ni-Fe-Cr-Cu) with Ni => 45 %
Nickel-iron-cobalt alloys (Ni-Fe-Co-Cr-Mo-Cu) with 31 % <= Ni <= 45 % and Fe => 20 %
Pure titanium
Titanium with O2 < 0,20 %
Titanium with 0,20 % < O2 <= 0,25 %
Titanium with 0,25 % < O2 <= 0,35 %
Titanium with 0,35 % < O2 <= 0,40 %
Alpha alloys (Alloys covered by group 52 are: Ti-0,2Pd Ti-2,5Cu Ti-5Al-2,5Sn Ti-8Al-1Mo-1V Ti-6Al-2Sn-4Zr-2Mo Ti-6Al-2Nb-1Ta-0,8Mo)
Alpha-beta alloys (Alloys covered by group 53 are: Ti-3Al-2,5V Ti-6Al-4V Ti-6Al-6V-2Sn Ti-7Al-4Mo)
Near-beta and beta alloys (Alloys covered by group 54 are: Ti-10V-2Fe-3Al Ti-13V-11Cr-3Al Ti-11,5Mo-6Zr-4,5Sn Ti-3Al-8V-6Cr-4Zr-4Mo)
Pure zirconium
Zirconium with 2,5 % Nb
Grey cast irons with specified tensile strength or Brinell hardness
Spheroidal-graphite cast irons with specified mechanical properties
Spheroidal-graphite cast irons, ferrite type, with specified tensile strength, 0,2 % proof stress, elongation and specified impact resistance values
Spheroidal-graphite cast irons, ferrite type, with specified tensile strength, 0,2 % proof stress and elongation or specified Brinell hardness
Spheroidal-graphite cast irons EN-GJS-500-7 and EN-GJS-450-10 (if > 20 % perlite) or specified Brinell hardness
Spheroidal-graphite cast irons, perlite type, with specified tensile strength, 0,2 % proof stress and elongation or specified Brinell hardness
Malleable cast irons
Austempered ductile cast irons
Austenitic cast irons
Cast irons excepting groups 71 to 75
Copper
Nickel
Titan
EN 10025-2 - S235JR
EN 10025-2 - S275J2
EN 10210-1 - S275NH
Basic material catalog
EN 10022-2 - 17Mo3 ( 1.5415 )
EN 10022-2 - 14Mo6 ( 1.5423 )
EN 10025-2 - S185 ( 1.0035 )
EN 10025-2 - S235JR ( 1.0038 )
EN 10025-2 - S275JR ( 1.0044 )
EN 10025-2 - S235J0 ( 1.0114 )
EN 10025-2 - S235J2+N ( 1.0116 )
EN 10025-2 - S275J0 ( 1.0143 )
EN 10025-2 - S275J2 ( 1.0145 )
EN 10025-3 - S275N ( 1.0490 )
EN 10025-3 - S275NL ( 1.0491 )
EN 10025-4 - S275M ( 1.8818 )
EN 10025-4 - S275ML ( 1.8819 )
EN 10028-2 - S235J2 ( 1.0117 )
EN 10028-2 - P235GH ( 1.0345 )
EN 10028-2 - P265GH ( 1.0425 )
EN 10028-3 - P275N ( 1.0486 )
EN 10028-3 - P275NH ( 1.0487 )
EN 10028-3 - P275NL1 ( 1.0488 )
EN 10028-3 - P275NL2 ( 1.1104 )
EN 10149-3 - P265NB ( 1.0423 )
EN 10149-3 - S260NC ( 1.0971 )
EN 10248-1 - S240GP ( 1.0021 )
EN 10248-1 - S270GP ( 1.0023 )
Filler metal 2
Material group
S
Norm name ISO
1.1 | FM1 | S | CastoMag 45250 | ISO 14341-A-G4Si1 | Castolin Europe GmbH
1.1 | FM1 | RC | EutecTrode 35088 | ISO 2560-A-E 38 2 RC 11 | Castolin Europe GmbH
1.1 | FM2 | S | CastoMag 45254 | ISO 16834 A-Mn 3 Ni1Cu | Castolin Europe GmbH
1.1 | FM1 | RC | Castolin 6601 | ISO 2560-A-E 38 RC 11 | Castolin Europe GmbH
1.1 | FM1 | B | EutecTrode 35066 B | ISO 2560-A-E 42 6 B 42 H5 | Castolin Europe GmbH
1.1 | FM1 | RR | EutecTrode 35086 R | ISO 2560-A-E 42 0 RR 12 | Castolin Europe GmbH
1.1 | FM1 | S | Castolin CP 21255 | EN 12536-O III | Castolin Europe GmbH
1.1 | FM1 | S | CastoMag 45203 | ISO 14341-A-G 46 4 M21 4Si1 | Castolin Europe GmbH
1.1 | FM1 | S | CASTOMAG 45202 | ISO 14341-A-G 42 4 M21 3Si1 | Castolin Europe GmbH
1.1 | FM1 | S | CastoMag 45255 | ISO 14341-A-G3Si1 | Castolin Europe GmbH
1.1 | FM1 | S | DT G III | EN 12536-O III | Dratec Draht-Technik GmbH
1.1 | FM1 | S | DT-SG 3 | ISO 14341-A-G4Si1 | Dratec Draht-Technik GmbH
1.1 | FM1 | S | Elgatic 100 | ISO 636-A-W 42 5 W3Si1 | Elga
1.1 | FM1 | S | Elgatic 100 | ISO 636-A-W 42 5 W3Si1 | Elga
1.1 | FM1 | Y | CORESHIELD 8 | 17632-A: T 42 2 Y N 2 | ESAB AB
1.1 | FM1 | R | OK Tubord 15.13 | ISO 17632-A-T 42 2 P C 1 H5 | ESAB AB
1.1 | FM1 | M | Coreweld 46 LS | ISO 17632-A-T 46 4 M M2 H5 | ESAB AB
1.1 | FM1 | S | U 39 | EN 20378 - O I | Hermann Fliess & Co. GmbH
1.1 | FM1 | S | Normag2 | ISO 14341-A-G 42 4 M G3Si1 | ISAF Group
1.1 | FM1 | S | ETA 2 | ISO 14341-A-G 3Si1 | ISAF Group
1.1 | FM1 | S | Automag 3 | ISO 14341-A-G 46 4 M G4Si1 | ISAF Group
1.1 | FM1 | S | ETA 3 | ISO 14341-A-G 46 4 M G4Si1 | ISAF Group
1.1 | FM1 | S | Carbo2000 | ISO 14341-A-G 46 2 C/M G4Si1 | ISAF Group
1.1 | FM1 | S | Automag 2 | ISO 14341-A-G 42 4 M G3Si1 | ISAF Group
1.1 | FM1 | P | STEIN-MF 713R | ISO 17632-A-T 46 4 P M1 H5 | ITW Welding GmbH
1.1 | FM1 | P | STEIN-MF 713R | ISO 17632-A-T 46 2 P C1 H5 | ITW Welding GmbH
1.1 | FM1 | RC | PRIMA blue | ISO 2560-A-E 42 0 RC 11 | Kjellberg Finsterwalde
1.1 | FM1 | B | PERFEKT | ISO 2560-A-E 38 3 B 41 H10 | Kjellberg Finsterwalde
1.1 | FM1 | B | GARANT X | ISO 2560-A-E 46 3 B 22 H5 | Kjellberg Finsterwalde
1.1 | FM1 | B | PROGRESS | ISO 2560-A-E 42 2 B 42 H10 | Kjellberg Finsterwalde
1.1 | FM1 | B | KORREX | ISO 2560-A-E 42 2 Z1NiCu B 42 | Kjellberg Finsterwalde
1.1 | FM1 | RC | LLOYD GRÜN | ISO 2560-A-E 35 0 RC 11 | Kjellberg Finsterwalde
1.1 | FM1 | R | Lloyd | ISO 2560-A-E 35 0 A 12 | Kjellberg Finsterwalde
1.1 | FM1 | RC | OVERCORD | ISO 2560-A-E 38 0 RC 11 | Lincoln Electric Europe B.V.
1.1 | FM1 | S | MT-WSG2 | ISO 636-A-W 38 5 W3Si1 | MTC
1.1 | FM1 | S | MT-G III | EN 12536-O III | MTC
1.1 | FM1 | B | MT - B 10 | ISO 2560-A-E 42 4 B 32 H5 | MTC
1.1 | FM1 | RC | MT - RC 3 | ISO 2560-A-E 38 0 RC 11 | MTC
1.1 | FM1 | S | MT-308L | ISO 21952-A-W CrMo1Si | MTC
1.1 | FM1 | B | CITOFLUX B00 | ISO 17632-A-T 42 5 B M 2 H5 | OERLIKON
1.1 | FM1 | S | Carbofil 1 | ISO 14341-A-G3Si1 | OERLIKON
1.1 | FM1 | B | SPEZIAL | ISO 2560-A-E 38 3 B 12 H10 | OERLIKON
1.1 | FM1 | RR | Fincord | ISO 2560-A-E 42 0 RR 12 | OERLIKON
1.1 | FM1 | B | TENACITO 38 R | ISO 2560-A-E 46 6 1Ni B 42 H5 | OERLIKON
1.1 | FM1 | M | CITOFLUX M00 | ISO 17632-A-T 46 5 M M 1 H5 | OERLIKON
1.1 | FM1 | M | CITOFLUX GALVA | ISO 17632-A-T 3T Z M M 1 H15 | OERLIKON
1.1 | FM1 | S | CARBOROD 1 | ISO 636-A-W 42 4 W3Si1 | OERLIKON
1.1 | FM1 | S | CARBOROD 1A | ISO 636-A-W 46 5 W4Si | OERLIKON
1.1 | FM1 | RA | Phoenix Rot AR 160 | ISO 2560-A-E 42 2 RA 53 | voestalpine Böhler
1.1 | FM1 | RC | Phoenix Blau | ISO 2560-A-E 42 0 RC 11 | voestalpine Böhler
1.1 | FM1 | RR | Phoenix Rot R 160 | ISO 2560-A-E 42 0 RR 53 | voestalpine Böhler
1.1 | FM1 | RR | Phoenix SH Multifer 180 | ISO 2560-A-E 42 0 RR 73 | voestalpine Böhler
1.1 | FM1 | S | Union K 52 | ISO 14341-A-G 3Si1 | voestalpine Böhler
1.1 | FM1 | S | BÖHLER BW XII | ISO 20378 - O III | voestalpine Böhler
1.1 | FM1 | RB | Phoenix SH Lila R | ISO 2560-A-E 42 2 RB 12 | voestalpine Böhler
1.1 | FM1 | RB | Phoenix SH Gelb R | ISO 2560-A-E 38 2 RB 12 | voestalpine Böhler
1.1 | FM5 | S | FF-IG | ISO 14343-A G 22 12 H | voestalpine Böhler
1.1 | FM1 | B | Phoenix K 50 R | ISO 2560-A-E 42 3 B 32 | voestalpine Böhler
1.1 | FM1 | B | Phoenix K 50 | ISO 2560-A-E 42 4 B 42 | voestalpine Böhler
1.1 | FM1 | C | Phoenix Cel 80 | ISO 2560-A-E 46 3 C 25 | voestalpine Böhler
1.1 | FM1 | S | Union Schwarz | EN 12536-O II | voestalpine Böhler
1.1 | FM1 | B | Phoenix SH Grün K 70 | ISO 2560-A-E 46 4 B 42 H5 | voestalpine Böhler
1.1 | FM1 | C | BÖHLER FOX CEL 70-P | ISO 2560-A-E 42 2 C 25 | voestalpine Böhler
1.1 | FM1 | R | Phoenix Grün | ISO 2560-A-E 42 0 R 12 | voestalpine Böhler
1.1 | FM1 | RA | Phoenix SH Gelb B | ISO 2560-A-E 38 0 RA 12 | voestalpine Böhler
1.1 | FM1 | S | BÖHLER DMO | ISO 20378 - O IV | voestalpine Böhler
1.1 | FM1 | S | Union I 52 | ISO 636-A-W 42 5 W3Si1 | voestalpine Böhler
1.1 | FM1 | S | Union I Mo | ISO 636-A-W 46 3 W2Mo/MoSi | voestalpine Böhler
1.1 | FM1 | S | Union SG 2-H | ISO 14341-A-G 3Si1 | voestalpine Böhler
1.1 | FM1 | S | Union Mo | EN 12536-O IV | voestalpine Böhler
1.1 | FM1 | S | Union 37 | EN 12536-O I | voestalpine Böhler
1.1 | FM1 | M | Union MV 70 | ISO 17632-A-T 46 6 M M 2 H5 | voestalpine Böhler
1.1 | FM1 | S | Union Rot N | EN 12536-O III | voestalpine Böhler
1.1 | FM1 | P | Union RV 71 | ISO 17632-A-T 46 4 P M1 H5 | voestalpine Böhler
1.1 | FM1 | S | Union I 52 | ISO 636-A-W 42 5 W3Si1 | voestalpine Böhler
1.1 | FM1 | S | Union I 52 | ISO 636-A-W 42 5 W3Si1 | voestalpine Böhler
1.1 | FM1 | S | Klöckner VDG GI | EN 12536-O I | WDI
1.1 | FM1 | S | Klöckner VDG GII | EN 12536-O II | WDI
1.2 | FM1 | B | CARBO SPEZIAL | ISO 2560-A-E 38 2 B 12 H10 | Carbo Weld
1.2 | FM1 | B | EnDOtec DO*265 S | ISO 17632-A-T 46 4 B M 3 H5 | Castolin Europe GmbH
1.2 | FM1 | S | CastoMag 45273 | ISO 21952-A-G MoSi | Castolin Europe GmbH
1.2 | FM1 | RC | EutecTrode 35076 RC | ISO 2560-A-E 38 0 RC 11 | Castolin Europe GmbH
1.2 | FM1 | B | Eutectrode 35256 | ISO 2560-A-E 42 4 B 42 H5 | Castolin Europe GmbH
1.2 | FM1 | RB | Eutectrode 35278 | ISO 2560-A-E 38 2 RB 12 | Castolin Europe GmbH
1.2 | FM1 | S | CastoMag 45202 | ISO 14341-A: G 42 4 M G3Si1 | Castolin Europe GmbH
1.2 | FM1 | Y | EnDOtec DO*266 S | ISO 17632-A-T 42 2 M M/C 1 H5 | Castolin Europe GmbH
1.2 | FM1 | M | EnDOtec DO*267 | ISO 17632-A-T 42 2 M M 2 H5 | Castolin Europe GmbH
1.2 | FM1 | RR | Eutectrode 35286 | ISO 2560-A-E 42 0 RR 12 | Castolin Europe GmbH
1.2 | FM2 | S | CastoMag 45250 | ISO 14341-A-G 46 2 M G4Si1 | Castolin Europe GmbH
1.2 | FM1 | S | CastoWig 45255 W | ISO 636-A-W 38 5 W3Si1 | Castolin Europe GmbH
1.2 | FM1 | S | DR-G I | EN 12536-O I | Drahpo GmbH
1.2 | FM1 | S | DR-G III | EN 12536-O III | Drahpo GmbH
1.2 | FM1 | S | DT-SG 2 | ISO 14341-A-G3Si1 | Dratec Draht-Technik GmbH
1.2 | FM1 | RC | OK 46.00 | ISO 2560-A E 38 0 RC 1 1 | ESAB AB
1.2 | FM1 | B | OK 53.05 | ISO 2560-A E 42 4 B 2 2 H10 | ESAB AB
1.2 | FM1 | S | OK Autrod 12.64 | ISO 14341-A-G4Si1 | ESAB AB
1.2 | FM1 | S | OK Autrod 12.51 | ISO 14341-A-G3Si1 | ESAB AB
1.2 | FM1 | RR | OK 43.32 | ISO 2560-A E 42 0 RR | ESAB AB
1.2 | FM1 | S | WELD G3Si1 | ISO 14341-A-G3Si1 | ESAB AB
1.2 | FM1 | R | OK 46.30 | ISO 2560-A E 38 0 R 1 2 | ESAB AB
1.2 | FM1 | S | OK AristoRod 12.57 | ISO 14341-A-G2Si | ESAB AB
1.2 | FM1 | S | OK Autrod 12.56 | ISO 14341-A-G3Si1 | ESAB AB
1.2 | FM1 | RB | OK 50.40 | ISO 2560-A E 42 2 RB 1 2 | ESAB AB
1.2 | FM1 | S | SW 70S G3 XQ | ISO 14341-A-G3Si1 | EWM AG
1.2 | FM1 | S | GFR R60 | EN 20378 - O III | EWM AG
1.2 | FM1 | S | SW 80S Mo | ISO 21952-A-G MoSi | EWM AG
1.2 | FM1 | S | SW 70S G3 | ISO 14341-A-G3Si1 | EWM AG
1.2 | FM1 | S | U 47 Mo | EN 20378 - O IV | Hermann Fliess & Co. GmbH
1.2 | FM1 | S | U 40 Ni | EN 20378 - O III | Hermann Fliess & Co. GmbH
1.2 | FM1 | S | U 40 | EN 20378 - O II | Hermann Fliess & Co. GmbH
1.2 | FM1 | S | Automag 3 | ISO 14341-A-G 46 4 M G4Si1 | ISAF Group
1.2 | FM1 | S | Automag 3 | ISO 14341-A-G 46 4 M G4Si1 | ISAF Group
1.2 | FM1 | B | GARANT AC/DC | ISO 2560-A-E 42 3 B 12 H10 | Kjellberg Finsterwalde
1.2 | FM1 | B | Impuls | ISO 3580-A-E Mo B 42 | Kjellberg Finsterwalde
1.2 | FM1 | RC | FERROTRODE RC | ISO 2560-A-E 38 0 RC 11 | Kjellberg Finsterwalde
1.2 | FM1 | B | FERROTRODE BR | ISO 2560-A-E 42 3 B 12 H10 | Kjellberg Finsterwalde
1.2 | FM1 | RC | PRIMA | ISO 2560-A-E 38 0 RC 11 | Kjellberg Finsterwalde
1.2 | FM1 | RR | TITAN ROT | ISO 2560-A-E 35 0 RR 12 | Kjellberg Finsterwalde
1.2 | FM1 | RR | TITAN S | ISO 2560-A-E 42 0 RR 12 | Kjellberg Finsterwalde
1.2 | FM1 | RB | TITAN | ISO 2560-A-E 38 2 RB 12 | Kjellberg Finsterwalde
1.2 | FM1 | B | Garant BR | ISO 2560-A-E 42 2 B 12 H10 | Kjellberg Finsterwalde
1.2 | FM1 | B | GARANT S | ISO 2560-A-E 46 4 B 42 H5 | Kjellberg Finsterwalde
1.2 | FM1 | B | GARANT | ISO 2560-A-E 42 2 B 42 H10 | Kjellberg Finsterwalde
1.2 | FM1 | A | TRUMPF | ISO 2560-A-E 35 0 A 13 | Kjellberg Finsterwalde
1.2 | FM1 | RR | KONTAKT 160 | ISO 2560-A-E 42 2 RR 53 | Kjellberg Finsterwalde
1.2 | FM1 | RB | OPTIMAL | ISO 2560-A-E 42 0 RB 12 | Kjellberg Finsterwalde
1.2 | FM1 | RB | TITAN K | ISO 2560-A-E 42 2 RB 12 | Kjellberg Finsterwalde
1.2 | FM1 | S | CARBOFIL 1 | ISO 14341-A-G 42 4 M21 3Si1 | Lincoln Electric Europe B.V.
1.2 | FM1 | RB | CITOREX | ISO 2560-A-E 38 2 RB 12 | Lincoln Electric Europe B.V.
1.2 | FM2 | S | OE-G II | EN 12536- O II | OERLIKON
1.2 | FM1 | S | OE-G III | EN 12536- O III | OERLIKON
1.2 | FM1 | S | OE-G IV | EN 12536- O IV | OERLIKON
1.2 | FM1 | RR | Phoenix Grün T | ISO 2560-A-E 42 0 RR 12 | voestalpine Böhler
1.2 | FM1 | RB | Phoenix Rot BR 160 | ISO 2560-A-E 42 2 RB 53 | voestalpine Böhler
1.2 | FM1 | B | Phoenix Spezial D | ISO 2560-A-E 42 3 B 12 H10 | voestalpine Böhler
1.2 | FM1 | C | Phoenix CEL 70 | ISO 2560-A-E 42 2 C 25 | voestalpine Böhler
1.2 | FM1 | A | Phoenix SH Gelb | ISO 2560-A-E 35 0 A 12 | voestalpine Böhler
1.2 | FM1 | S | Union K 56 | ISO 14343-A-G 4Si1 | voestalpine Böhler
1.2 | FM1 | B | Union BA 70 | ISO 17632-A-T 46 4 B M 3 H5 | voestalpine Böhler
1.2 | FM1 | S | Union I 52 | ISO 636-A-W 42 5 W3Si1 | voestalpine Böhler
1.2 | FM1 | B | Phoenix 120 K | E 42 5 B 3 2 H5 | voestalpine Böhler
1.2 | FM1 | B | Union BA 70 | ISO 17632-A-T 42 4 B C 3 H5 | voestalpine Böhler
1.2 | FM1 | S | Klöckner VDG GIII | EN 12536-O III | WDI
1.3 | FM2 | S | Carbo S-NiMo1 | EN ISO 16834: GmN3Ni1Mo | Carbo Weld
1.3 | FM1 | B | EutecTrode 6666 N | ISO 2560-A-E 38 2 B 12 H10 | Castolin Europe GmbH
1.3 | FM1 | B | Castolin 6666 | ISO 2560-A-E 42 6 B 32 | Castolin Europe GmbH
1.3 | FM1 | S | OK AristoRod 13.26L | ISO 14341-A-G Z 3Ni1 Cu | ESAB AB
1.3 | FM1 | B | OK 48.00 | ISO 2560-A E 42 4 B 4 2 H5 | ESAB AB
1.3 | FM1 | S | CARBOROD Ni1 | ISO 636-A-W 46 6 M G3Ni1 | OERLIKON
1.3 | FM1 | M | Union MV 70 | ISO 17632-A-T 46 4 M M 2 H5 | voestalpine Böhler
1.3 | FM1 | C | Phoenix Cel 90 | ISO 2560-A-E 50 3 1 Ni C 25 | voestalpine Böhler
1.3 | FM1 | S | Union RV Ni 1 | ISO 17632-A-T 50 6 1Ni P M 1 H5 | voestalpine Böhler
1.3 | FM1 | S | Union I 1,2 Ni | ISO 636-A-W 46 6 W3Ni1 | voestalpine Böhler
1.3 | FM1 | S | Union I 2,5 Ni | ISO 636-A-W 46 8 W2Ni2 | voestalpine Böhler
1.3 | FM1 | S | Union I Mo | ISO 636-A-W 46 3 W2Mo/MoSi | voestalpine Böhler
Norm name AWS
Trade name
Certificate of Approval
Protective gas group
ISO 14174 - S
ISO 14175 - C1
ISO 14175 - I1
ISO 14175 - I2
ISO 14175 - I3
ISO 14175 - M11
ISO 14175 - M12
ISO 14175 - M13
ISO 14175 - M14
ISO 14175 - M20
ISO 14175 - M21
ISO 14175 - M22
ISO 14175 - M23
ISO 14175 - M24
ISO 14175 - M25
ISO 14175 - M31
ISO 14175 - M32
ISO 14175 - N2
ISO 14175 - N4
ISO 14175 - N5
ISO 14175 - R1
ISO 14175 - R2
ISO 14175 - Z
l/min
Norm name ISO
Manufacturer's name