SM
SchoolM
Toggle navigation
Deutsch
English
français
polski
русский
shqip
Max Mustermann
Logout
technical parameter | Catalog-ID 000736
Bm
1
CW009A [Cu-OFE]
Bm
2
CW009A [Cu-OFE]
α
β
b
3.0 mm
c
t
1
2.0 mm
t
2
2.0 mm
D
1
30.0 mm
D
2
36.0 mm
R
l
l
r
0.0 mm
l
u
l
1
l
2
l
j
parent metal / Brazing filler metall / Shielding gases
parent metal 1 (Bm
1
)
Material group
Steels with a specified minimum yield strength ReH <= 275 N/mm2
Steels with a specified minimum yield strength 275 N/mm2 < ReH <= 360
Normalized fine-grain steels with a specified minimum yield strength ReH > 360 N/mm2
Steels with improved atmospheric corrosion resistance whose analysis may exceed the requirements for the individual elements as indicated in group 1
Thermomechanically treated fine-grain steels and cast steels with a specified minimum yield strength ReH > 360 N/mm2
Thermomechanically treated fine-grain steels and cast steels with a specified minimum yield strength 360 N/mm2 < ReH <= 460 N/mm2
Thermomechanically treated fine-grain steels and cast steels with a specified minimum yield strength ReH > 460 N/mm2
Quenched and tempered and precipitation-hardened fine-grain steels except stainless steels with a specified minimum yield strength ReH > 360 N/mm2
Quenched and tempered fine-grain steels with a specified minimum yield strength 360 N/mm2 < ReH <= 690 N/mm2
Quenched and tempered fine-grain steels with a specified minimum yield strength ReH > 690 N/mm2
Precipitation-hardened fine-grain steels except stainless steels
Low vanadium alloyed Cr-Mo-(Ni) steels with Mo <= 0,7 % and V <= 0,1 %
Steels with Cr <= 0,3 % and Ni <= 0,7 %
Steels with Cr <= 0,7 % and Ni <= 1,5 %
Cr-Mo steels free of vanadium with C <= 0,35 %
Steels with 0,75 % <= Cr <= 1,5 % and Mo <= 0,7 %
Steels with 1,5 % < Cr <= 3,5 % and 0,7 % < Mo <= 1,2 %
Steels with 3,5 % < Cr <= 7,0 % and 0,4 % < Mo <= 0,7 %
Steels with 7,0 % < Cr <= 10,0 % and 0,7 % < Mo <= 1,2 %
High vanadium alloyed Cr-Mo-(Ni) steels
Steels with 0,3 % <= Cr <= 0,75 %, Mo <= 0,7 % and V <= 0,35 %
Steels with 0,75 % < Cr <= 3,5 %, 0,7 % < Mo <= 1,2 % and V <= 0,35 %
Steels with 3,5 % < Cr <= 7,0 %, Mo <= 0,7 % and 0,45 % <= V <= 0,55 %
Steels with 7,0 % < Cr <= 12,5 %, 0,7 % < Mo <= 1,2 % and V <= 0,35 %
Ferritic, martensitic or precipitation-hardened stainless steels with C <= 0,35 % and 10,5 % <= Cr <= 30 %
Ferritic stainless steels
Martensitic stainless steels
Precipitation-hardened stainless steels
Austenitic stainless steels, Ni <= 31 %
Austenitic stainless steels with Cr <= 19 %
Austenitic stainless steels with Cr > 19 %
Manganese austenitic stainless steels with 4 % < Mn <= 12 %
Nickel alloy steels with Ni <= 10,0 %
Nickel alloy steels with Ni <= 3,0 %
Nickel alloy steels with 3,0 % < Ni = 8,0 %
Nickel alloy steels with 8,0 % < Ni <= 10,0 %
Austenitic ferritic stainless steels (duplex)
Austenitic ferritic stainless steels with Cr <= 24 %
Austenitic ferritic stainless steels with Cr > 24 %
Steels covered by group 1 except 0,25 % < C <= 0,85 %
Steels as indicated in group 11 with 0,25 % < C <= 0,35 %
Steels as indicated in group 11 with 0,35 % < C <= 0,5 %
Steels as indicated in group 11 with 0,5 % < C <= 0,85 %
Pure aluminium with <= 1 % impurities or alloy content
Non-heat-treatable alloys
Aluminium-manganese alloys
Aluminium-magnesium alloys with Mg <= 1,5 %
Aluminium-magnesium alloys with 1,5 % < Mg <= 3,5 %
Aluminium-magnesium alloys with Mg > 3,5 %
Heat-treatable alloys
Aluminium-magnesium-silicon alloys
Aluminium-zinc-magnesium alloys
Aluminium-silicon alloys with Cu <= 1 %
Aluminium-silicon alloys with Cu <= 1 % and 5 % < Si <= 15 %
Aluminium-silicon-magnesium alloys with Cu <= 1 % 5 % < Si <= 15 % and 0,1 % < Mg <= 0,80 %
Aluminium-silicon-copper alloys with 5 % < Si <= 14 % 1 % < Cu <= 5 % and Mg <= 0,8 %
Aluminium-copper alloys with 2 % < Cu <= 6 %
Copper with up to 6 % Ag and 3 % Fe
Copper-zinc alloys
Copper-zinc alloys, binary
Copper-zinc alloys, complex
Copper-tin alloys
Copper-nickel alloys
Copper-aluminium alloys
Copper-nickel-zinc alloys
Copper alloys, low-alloyed (less than 5 % other elements) not covered by groups 31 to 36
Other copper alloys (5 % or more other elements) not covered by groups 31 to 36
Pure nickel
Nickel-copper alloys (Ni-Cu) with Ni => 45 %, Cu => 10 %
Nickel-chromium alloys(Ni-Cr-Fe-Mo) with Ni => 40 %
Nickel-molybdenum alloys (Ni-Mo) with Ni <= 45 %, Mo => 32 %
Nickel-iron-chromium alloys (Ni-Fe-Cr) with Ni => 31 %
Nickel-chromium-cobalt alloys (Ni-Cr-Co) with Ni => 45 %, Co => 10 %
Nickel-iron-chromium-copper alloys (Ni-Fe-Cr-Cu) with Ni => 45 %
Nickel-iron-cobalt alloys (Ni-Fe-Co-Cr-Mo-Cu) with 31 % <= Ni <= 45 % and Fe => 20 %
Pure titanium
Titanium with O2 < 0,20 %
Titanium with 0,20 % < O2 <= 0,25 %
Titanium with 0,25 % < O2 <= 0,35 %
Titanium with 0,35 % < O2 <= 0,40 %
Alpha alloys (Alloys covered by group 52 are: Ti-0,2Pd Ti-2,5Cu Ti-5Al-2,5Sn Ti-8Al-1Mo-1V Ti-6Al-2Sn-4Zr-2Mo Ti-6Al-2Nb-1Ta-0,8Mo)
Alpha-beta alloys (Alloys covered by group 53 are: Ti-3Al-2,5V Ti-6Al-4V Ti-6Al-6V-2Sn Ti-7Al-4Mo)
Near-beta and beta alloys (Alloys covered by group 54 are: Ti-10V-2Fe-3Al Ti-13V-11Cr-3Al Ti-11,5Mo-6Zr-4,5Sn Ti-3Al-8V-6Cr-4Zr-4Mo)
Pure zirconium
Zirconium with 2,5 % Nb
Grey cast irons with specified tensile strength or Brinell hardness
Spheroidal-graphite cast irons with specified mechanical properties
Spheroidal-graphite cast irons, ferrite type, with specified tensile strength, 0,2 % proof stress, elongation and specified impact resistance values
Spheroidal-graphite cast irons, ferrite type, with specified tensile strength, 0,2 % proof stress and elongation or specified Brinell hardness
Spheroidal-graphite cast irons EN-GJS-500-7 and EN-GJS-450-10 (if > 20 % perlite) or specified Brinell hardness
Spheroidal-graphite cast irons, perlite type, with specified tensile strength, 0,2 % proof stress and elongation or specified Brinell hardness
Malleable cast irons
Austempered ductile cast irons
Austenitic cast irons
Cast irons excepting groups 71 to 75
Copper
Nickel
Titan
CW009A [Cu-OFE]
eee - CW024A [Cu-DHP]
Basic material catalog
CW009A [Cu-OFE] ( 2.0065 )
CW021A [Cu-HCP] ( 2.0070 )
CW021A [Cu-HCP] ( 2.0060 )
eee - CW024A [Cu-DHP] ( 2.0090 )
Filler metal
Norm name ISO
Lot-Cu | ISO 17672: Cu 099 |
Lot-Cu | ISO 17672: Cu 561 |
Lot-Cu | ISO 17672: Cu 565 |
Lot-Cu | ISO 17672: Cu 595 |
Lot-Ni | ISO 17672: Ni 600 |
Lot-Ni | ISO 17672: Ni 610 |
Lot-Ni | ISO 17672: Ni 612 |
Lot-Ni | ISO 17672: Ni 620 |
Lot-Ag | ISO 17672: Ni 630 |
Lot-Ni | ISO 17672: Ni 631 |
Lot-Ni | ISO 17672: Ni 650 |
Lot-Ni | ISO 17672: Ni 655 |
Lot-Ni | ISO 17672: Ni 660 |
Lot-Ni | ISO 17672: Ni 661 |
Lot-Ni | ISO 17672: Ni 670 |
Lot-Cu | ISO 17672: Cu 551 |
Lot-Cu | ISO 17672: Cu 541 |
Lot-Cu | ISO 17672: Cu 102 |
Lot-Cu | ISO 17672: Cu 110 |
Lot-Cu | ISO 17672: Cu 141 |
Lot-Cu | ISO 17672: Cu 188 |
Lot-Cu | ISO 17672: Cu 186 |
Lot-Cu | ISO 17672: Cu 922 |
Lot-Cu | ISO 17672: Cu 925 |
Lot-Cu | ISO 17672: Cu 470 |
Lot-Cu | ISO 17672: Cu 471 |
Lot-Cu | ISO 17672: Cu 670 |
Lot-Cu | ISO 17672: Cu 671 |
Lot-Cu | ISO 17672: Cu 680 |
Lot-Cu | ISO 17672: Cu 521 |
Lot-Cu | ISO 17672: Cu 511 |
Lot-Ni | ISO 17672: Ni 671 |
Lot-Ni | ISO 17672: Ni 700 |
Lot-Ni | ISO 17672: Ni 710 |
Lot-Au | ISO 17672: Au 295a |
Lot-Au | ISO 17672: Au 300 |
Lot-Au | ISO 17672: Au 351 |
Lot-Au | ISO 17672: Au 354 |
Lot-Au | ISO 17672: Au 375a |
Lot-Au | ISO 17672: Au 503 |
Lot-Au | ISO 17672: Au 507 |
Lot-Au | ISO 17672: Au 625a |
Lot-Au | ISO 17672: Au 700 |
Lot-Au | ISO 17672: Au Au 375a |
Lot-Au | ISO 17672: Au 755 |
Lot-Au | ISO 17672: Au 800 |
Lot-Au | ISO 17672: Au 801a |
Lot-Au | ISO 17672: Au 827a |
Lot-Pd | ISO 17672: Pd 647a |
Lot-Pd | ISO 17672: Pd 597a |
Lot-Ni | ISO 17672: Ni 720 |
Lot-Ni | ISO 17672: Ni 800 |
Lot-Ni | ISO 17672: Ni 810 |
Lot-Ni | ISO 17672: Ni 900 |
Lot-Pd | ISO 17672: Pd 287a |
Lot-Pd | ISO 17672: Pd 288a |
Lot-Pd | ISO 17672: Pd 387a |
Lot-Pd | ISO 17672: Pd 388a |
Lot-Pd | ISO 17672: Pd 481a |
Lot-Pd | ISO 17672: Pd 483a |
Lot-Pd | ISO 17672: Pd 484a |
Lot-Pd | ISO 17672: Pd 485a |
Lot-Pd | ISO 17672: Pd 496a |
Lot-Pd | ISO 17672: Pd 587a |
Lot-Au | ISO 17672: Au 927 |
Lot-Cu | ISO 17672: Cu 087 |
Lot-Ag | ISO 17672: Ag 138 |
Lot-Ag | ISO 17672: Ag 230 |
Lot-Ag | ISO 17672: Ag 235 |
Lot-Ag | ISO 17672: Ag 245 |
Lot-Ag | ISO 17672: Ag 250 |
Lot-Ag | ISO 17672: Ag 265 |
Lot-Ag | ISO 17672: Ag 270 |
Lot-Ag | ISO 17672: Ag 326 |
Lot-Ag | ISO 17672: Ag 330 |
Lot-Ag | ISO 17672: Ag 220 |
Lot-Ag | ISO 17672: Ag 160 |
Lot-Ag | ISO 17672: Cu 571 |
Lot-CuP | ISO 17672: CuP 279 |
Lot-CuP | ISO 17672: CuP 281 |
Lot-CuP | ISO 17672: CuP 284 |
Lot-CuP | ISO 17672: CuP 286 |
Lot-Ag | ISO 17672: Ag 205 |
Lot-Ag | ISO 17672: Ag 212 |
Lot-Pd | ISO 17672: Pd 657a |
Lot-Cu | ISO 17672: Cu 470a |
Lot-Ag | ISO 17672: Ag 335 |
Lot-Ag | ISO 17672: Ag 340 |
Lot-CuP | ISO 17672: CuP 285 |
Lot-CuP | ISO 17672: CuP 282 |
Lot-CuP | ISO 17672: CuP 283 |
Lot-CuP | ISO 17672: CuP 385 |
Lot-Ag | ISO 17672: Ag 425 |
Lot-CuP | ISO 17672: CuP 386 |
Lot-Ag | ISO 17672: Ag 485 |
Lot-Ag | ISO 17672: Ag 463 |
Lot-Ag | ISO 17672: Ag 456 |
Lot-Ag | ISO 17672: Ag 454 |
Lot-Ag | ISO 17672: Ag 345 |
Lot-Ag | ISO 17672: Ag 450 |
Lot-Ag | ISO 17672: Ag 440 |
Lot-CuP | ISO 17672: CuP 389 |
Lot-Ag | ISO 17672: Ag 350 |
Lot-Ag | ISO 17672: Ag 351 |
Lot-Ag | ISO 17672: Ag 244 | Armin Haim
Lot-CuP | ISO 17672: CuP 182 | Armin Hain
Lot-Ag | DIN 8513: L-Ag20 | Armin Hain
Lot-Ag | ISO 17672: Ag 449 | Armin Hain
Lot-Ag | ISO 17672: Ag 156 | Armin Hain
Lot-Ag | ISO 17672: Ag 155 | Armin Hain
Lot-Ag | ISO 17672: Ag 134 | Armin Hain
Lot-Ag | ISO 17672: Ag 130 | Armin Hain
Lot-Ag | ISO 17672: Ag 145 | Armin Hain
Lot-CuP | ISO 17672: CuP 179 | Armin Hain
Lot-Ag | ISO 17672: Ag 427 | Armin Hain
Lot-CuP | ISO 17672: CuP 181 | Armin Hain
Lot-CuP | ISO 17672: CuP 180 | Armin Hain
Lot-CuP | ISO 17672: CuP 178 | Armin Hain
Lot-Ag-U | EN 1044: AG 206 | Armin Hain
Lot-Ag-U | ISO 17672: Ag 156 | Armin Hain
Lot-Ag-U | ISO 17672: Ag 155 | Armin Hain
Lot-Ag-U | ISO 17672: Ag 145 | Armin Hain
Lot-Ag-U | ISO 17672: Ag 140 | Armin Hain
Lot-Ag-U | ISO 17672: Ag 130 | Armin Hain
Lot-Cu | ISO 3677: B Cu87MnCo 980-1030 | Armin Hain
Lot-Ag | ISO 3677: B Ag64CuInMnNi 730-780 | Armin Hain
Lot-Cu | ISO 3677: B Cu86MnNi 970-990 | Armin Hain
Lot-Ag | ISO 3677: B Ag49ZnCuMnNi 670-900 | Armin Hain
Lot-Cu | ISO 17672: CU 733 | FONTARGEN
Lot-Cu | ISO 17672: Cu 681 | FONTARGEN
Lot-Zn | ISO 17672: Cu 470a | FONTARGEN
Lot-Ag | ISO 17672: Ag 140 | FONTARGEN
Lot-Zn | ISO 17672: Cu 470a | FONTARGEN
Norm name AWS
Trade name
Certificate of Approval
Protective gas group
ISO 14174 - S
ISO 14175 - C1
ISO 14175 - I1
ISO 14175 - I2
ISO 14175 - I3
ISO 14175 - M11
ISO 14175 - M12
ISO 14175 - M13
ISO 14175 - M14
ISO 14175 - M20
ISO 14175 - M21
ISO 14175 - M22
ISO 14175 - M23
ISO 14175 - M24
ISO 14175 - M25
ISO 14175 - M31
ISO 14175 - M32
ISO 14175 - N2
ISO 14175 - N4
ISO 14175 - N5
ISO 14175 - R1
ISO 14175 - R2
ISO 14175 - Z
l/min
Norm name ISO
Manufacturer's name
parent metal 2 (Bm
2
)
Material group
Steels with a specified minimum yield strength ReH <= 275 N/mm2
Steels with a specified minimum yield strength 275 N/mm2 < ReH <= 360
Normalized fine-grain steels with a specified minimum yield strength ReH > 360 N/mm2
Steels with improved atmospheric corrosion resistance whose analysis may exceed the requirements for the individual elements as indicated in group 1
Thermomechanically treated fine-grain steels and cast steels with a specified minimum yield strength ReH > 360 N/mm2
Thermomechanically treated fine-grain steels and cast steels with a specified minimum yield strength 360 N/mm2 < ReH <= 460 N/mm2
Thermomechanically treated fine-grain steels and cast steels with a specified minimum yield strength ReH > 460 N/mm2
Quenched and tempered and precipitation-hardened fine-grain steels except stainless steels with a specified minimum yield strength ReH > 360 N/mm2
Quenched and tempered fine-grain steels with a specified minimum yield strength 360 N/mm2 < ReH <= 690 N/mm2
Quenched and tempered fine-grain steels with a specified minimum yield strength ReH > 690 N/mm2
Precipitation-hardened fine-grain steels except stainless steels
Low vanadium alloyed Cr-Mo-(Ni) steels with Mo <= 0,7 % and V <= 0,1 %
Steels with Cr <= 0,3 % and Ni <= 0,7 %
Steels with Cr <= 0,7 % and Ni <= 1,5 %
Cr-Mo steels free of vanadium with C <= 0,35 %
Steels with 0,75 % <= Cr <= 1,5 % and Mo <= 0,7 %
Steels with 1,5 % < Cr <= 3,5 % and 0,7 % < Mo <= 1,2 %
Steels with 3,5 % < Cr <= 7,0 % and 0,4 % < Mo <= 0,7 %
Steels with 7,0 % < Cr <= 10,0 % and 0,7 % < Mo <= 1,2 %
High vanadium alloyed Cr-Mo-(Ni) steels
Steels with 0,3 % <= Cr <= 0,75 %, Mo <= 0,7 % and V <= 0,35 %
Steels with 0,75 % < Cr <= 3,5 %, 0,7 % < Mo <= 1,2 % and V <= 0,35 %
Steels with 3,5 % < Cr <= 7,0 %, Mo <= 0,7 % and 0,45 % <= V <= 0,55 %
Steels with 7,0 % < Cr <= 12,5 %, 0,7 % < Mo <= 1,2 % and V <= 0,35 %
Ferritic, martensitic or precipitation-hardened stainless steels with C <= 0,35 % and 10,5 % <= Cr <= 30 %
Ferritic stainless steels
Martensitic stainless steels
Precipitation-hardened stainless steels
Austenitic stainless steels, Ni <= 31 %
Austenitic stainless steels with Cr <= 19 %
Austenitic stainless steels with Cr > 19 %
Manganese austenitic stainless steels with 4 % < Mn <= 12 %
Nickel alloy steels with Ni <= 10,0 %
Nickel alloy steels with Ni <= 3,0 %
Nickel alloy steels with 3,0 % < Ni = 8,0 %
Nickel alloy steels with 8,0 % < Ni <= 10,0 %
Austenitic ferritic stainless steels (duplex)
Austenitic ferritic stainless steels with Cr <= 24 %
Austenitic ferritic stainless steels with Cr > 24 %
Steels covered by group 1 except 0,25 % < C <= 0,85 %
Steels as indicated in group 11 with 0,25 % < C <= 0,35 %
Steels as indicated in group 11 with 0,35 % < C <= 0,5 %
Steels as indicated in group 11 with 0,5 % < C <= 0,85 %
Pure aluminium with <= 1 % impurities or alloy content
Non-heat-treatable alloys
Aluminium-manganese alloys
Aluminium-magnesium alloys with Mg <= 1,5 %
Aluminium-magnesium alloys with 1,5 % < Mg <= 3,5 %
Aluminium-magnesium alloys with Mg > 3,5 %
Heat-treatable alloys
Aluminium-magnesium-silicon alloys
Aluminium-zinc-magnesium alloys
Aluminium-silicon alloys with Cu <= 1 %
Aluminium-silicon alloys with Cu <= 1 % and 5 % < Si <= 15 %
Aluminium-silicon-magnesium alloys with Cu <= 1 % 5 % < Si <= 15 % and 0,1 % < Mg <= 0,80 %
Aluminium-silicon-copper alloys with 5 % < Si <= 14 % 1 % < Cu <= 5 % and Mg <= 0,8 %
Aluminium-copper alloys with 2 % < Cu <= 6 %
Copper with up to 6 % Ag and 3 % Fe
Copper-zinc alloys
Copper-zinc alloys, binary
Copper-zinc alloys, complex
Copper-tin alloys
Copper-nickel alloys
Copper-aluminium alloys
Copper-nickel-zinc alloys
Copper alloys, low-alloyed (less than 5 % other elements) not covered by groups 31 to 36
Other copper alloys (5 % or more other elements) not covered by groups 31 to 36
Pure nickel
Nickel-copper alloys (Ni-Cu) with Ni => 45 %, Cu => 10 %
Nickel-chromium alloys(Ni-Cr-Fe-Mo) with Ni => 40 %
Nickel-molybdenum alloys (Ni-Mo) with Ni <= 45 %, Mo => 32 %
Nickel-iron-chromium alloys (Ni-Fe-Cr) with Ni => 31 %
Nickel-chromium-cobalt alloys (Ni-Cr-Co) with Ni => 45 %, Co => 10 %
Nickel-iron-chromium-copper alloys (Ni-Fe-Cr-Cu) with Ni => 45 %
Nickel-iron-cobalt alloys (Ni-Fe-Co-Cr-Mo-Cu) with 31 % <= Ni <= 45 % and Fe => 20 %
Pure titanium
Titanium with O2 < 0,20 %
Titanium with 0,20 % < O2 <= 0,25 %
Titanium with 0,25 % < O2 <= 0,35 %
Titanium with 0,35 % < O2 <= 0,40 %
Alpha alloys (Alloys covered by group 52 are: Ti-0,2Pd Ti-2,5Cu Ti-5Al-2,5Sn Ti-8Al-1Mo-1V Ti-6Al-2Sn-4Zr-2Mo Ti-6Al-2Nb-1Ta-0,8Mo)
Alpha-beta alloys (Alloys covered by group 53 are: Ti-3Al-2,5V Ti-6Al-4V Ti-6Al-6V-2Sn Ti-7Al-4Mo)
Near-beta and beta alloys (Alloys covered by group 54 are: Ti-10V-2Fe-3Al Ti-13V-11Cr-3Al Ti-11,5Mo-6Zr-4,5Sn Ti-3Al-8V-6Cr-4Zr-4Mo)
Pure zirconium
Zirconium with 2,5 % Nb
Grey cast irons with specified tensile strength or Brinell hardness
Spheroidal-graphite cast irons with specified mechanical properties
Spheroidal-graphite cast irons, ferrite type, with specified tensile strength, 0,2 % proof stress, elongation and specified impact resistance values
Spheroidal-graphite cast irons, ferrite type, with specified tensile strength, 0,2 % proof stress and elongation or specified Brinell hardness
Spheroidal-graphite cast irons EN-GJS-500-7 and EN-GJS-450-10 (if > 20 % perlite) or specified Brinell hardness
Spheroidal-graphite cast irons, perlite type, with specified tensile strength, 0,2 % proof stress and elongation or specified Brinell hardness
Malleable cast irons
Austempered ductile cast irons
Austenitic cast irons
Cast irons excepting groups 71 to 75
Copper
Nickel
Titan
CW009A [Cu-OFE]
eee - CW024A [Cu-DHP]
Basic material catalog
CW009A [Cu-OFE] ( 2.0065 )
CW021A [Cu-HCP] ( 2.0070 )
CW021A [Cu-HCP] ( 2.0060 )
eee - CW024A [Cu-DHP] ( 2.0090 )
Flux
FH 21 Flussmittel
form of delivery
Paste
Method of flux supply
clamping device